There are three simple steps to the Color Twin Process:

1. Will resurfacing my headlights improve my visibility while driving at night?

Yes. Resurfacing your lenses may improve your night visibility by as much as 95%. Driving with yellowed or clouded lenses is a safety hazard. After resurfacing your lenses you will notice that you no longer need to drive with your brights on all the time.

2. Can I resurface the lens to prevent yellowing if there is nothing wrong with the lens?

Yes. We strongly recommend this. Follow all three steps as if you are resurfacing an aged lens. We recommend repeating this every 12-24 months for best results.

3. I've resurfaced my headlights using your system and they look great. How long will this hold up?

This is dependent upon a number of different factors such as, climate, amount of UV (sun) exposure, salty ocean air, high mineral content in water, improper cleaning and caring for your vehicle, and other factors. Our product was developed and tested in south east Florida where we are subject to the worst of all of these elements and on the cars we've tracked, we still don't have any breakdown.

4. Is the yellow on some headlights coming from the inside?

It's possible. Depending on the car and how well the headlight is sealed, some headlights do have a little bit of yellow coming from the inside. This is usually just a small portion of the damage you are seeing and using our system will still drastically improve the appearance and your night time visibility.

5. The lights on my car have a gritty feel to them and I can see pits in the plastic. Can your system fix this?

Yes. This type of repair takes a little more work, but you'll still be done with both headlights in less than 10 minutes. Call us for more detailed instruction if needed.

6. Can I use this on the red and yellow plastic that the blinkers and tail lights are made out of?

Yes. This system can be used on any type of plastic. It doesn't even need to be automobile related.

7. After I finished step 2 ( the oxidation remover) my lens was already very clear and shiny. Do I need to use step 3, the shine restorer?

Yes. The Shine Restorer not only increases the shine but it protects and seals the lens. If you do not use the Shine Restorer the lens will start to dull within a few days.

Detail King is actively pursuing qualified individuals to join the Detail King team as independent dealers delivering the Color Twin Process to auto dealerships in local territories

Our Showroom New product makes plastic trim look brand new again. Door handles, mirror casings, wheel flairs, bumper trim, running board inserts, faded bedliners, even golf cart trim, virtually anything plastic on the exterior of a vehicle can be restored to like-new condition.