Mytee HP90 Extractor Value Kit - Crevice Tool + Floor Wand + Chemicals

Número de pieza: Mytee-HP-90-Kit

$2,089.00 /unit

en los Estados Unidos continentales

añadir a la cesta Agotado Avisarme cuando esté disponible Notificarme

• Descripción
  Note: Shipping costs are included for UPS Ground shipping to the Continental USA. If you want this HP90 bundle kit shipped to outside the Continental USA or a quicker shipping service other than UPS Ground, then please contact us 724-325-0008 for information regarding the additional costs.

  
  

  Our Mytee HP90 Stingray Value Kit includes the Heated Extractor, Extractor Chemicals, Mytee AirLite Tool, Crevice Tool, 10" Single Jet EZ Collapsible Floor Wand and ground shipping to continental USA. The extractor chemicals include (1) quart of Automotive Extractor Soap, (1) quart of Mytee System Maintainer and (1) quart of Extractor Defoamer.

  
  

  About The Mytee HP90 Stingray™

  
  

  The Mytee HP90 Stingray™ is a 120 PSI heated automotive detail extractor built for high-volume mobile detail rigs and shop-grade interior work, full-size cleaning performance in a compact, single-cord chassis that loads into a van without a second operator. The dual 5-gallon tanks (solution and recovery) give you enough fluid capacity to power through back-to-back interiors, fleet vehicles, and biohazard restoration jobs before a refill, which is where the Stingray earns its spot between the Mytee Lite III 8070 and the HP120 Grand Prix.

  
  

  Mytee HP90 Stingray™ Add On Options:

  
  

  • Mytee H375 Hose Hanger

  
  

  Warning: This product can expose you to chemicals including Lead and Chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information Click Here or go to www.P65warnings.ca.gov
• Para mejores resultados

  Beyond the output numbers, the Stingray is built for the realities of a route. The faucet-fill adapter and molded-in carry handles cut fill-and-load time on every stop, while the roto-molded poly body shrugs off the rust and dents that kill sheet-metal machines in a working van. The high drain valve empties straight into a standard bucket instead of dribbling down the side, and the automatic shut-off float protects the vacuum motor if a recovery tank overfills. The whole rig slides into a van, truck bed, or trailer without eating a ton of cargo space. All of it runs from a single cord, so finding power on site is never the bottleneck.

• Cómo utilizar
  • Body: Roto-molded polyethylene housing
  • Wheels: 3" (7.6 cm) locking casters all around
  • Solution Tank: 5 gallon (19L) capacity
  • Vacuum Tank: 5 gallon (19L) capacity
  • Vacuum: Single 3-stage vacuum motor
  • CFM: 100
  • Water Lift: 130"
  • Vacuum Shut-Off: Stainless steel shut-off switch in recovery tank
  • Pump: Diaphragm demand pump
  • PSI: 120
  • GPM: 1.3
  • Heater: REAL HEAT™ system, 1,200W, 210°F maximum
  • Extractor Includes: (1) 4" upholstery tool, (1) 15' vacuum & solution hose combo
  • Power Cord: Single 25' (7.6 m) 12/3
  • Amp Draw (110-120V 60Hz): Cord one: 20 amps
  • Net Weight: 65 lbs (29.5 kg)
  • Machine Dimensions: 28" × 16" × 32" (71 cm × 40.6 cm × 81.3 cm)
  • Shipping Weight: 80 lbs (36.3 kg)
• Shipping Information

  This product qualifies for Free Shipping! Expedited shipping costs will also be calculated during checkout.