How should I clean and care for my pads?

Pads should be cleaned during use after polishing each section with either a pad cleaning brush or an air compressor to blow our compound/polish prior to applying more product to the pad. At the end of the job, pads should be cleaned with a pad cleaning solution such as our Clean All, and can be cleaned with a machine like our Lake Country Pad Washer 4000 System or manually with a stiff nylon brush. Scrub with brush of pad washer and cleaning chemical, rinse and wring out all compound/polish/protectant residue, and then let air dry for longest pad life.

How many vehicles should I get out of a pad and how do I know when it is time to replace the pad?

The amount of vehicles that you will get out of a pad will be determined by how aggressive you are getting with the pad. Compounding pads will wear down the quickest since you are doing the most aggressive work with these pads. Running on higher speeds will also add to aggressiveness which will shorten pad life as well. You want to use multiple pads on a vehicle for best correction results but if you were to use 1 single Compounding pad to do an entire vehicle, you would probably get 10-15 vehicles on average before needing to replace the pad. If you were to use 1 single Polishing pad (again multiple pads per vehicle is best) to do an entire vehicle, you would probably get 20-25 vehicles on average before needing to replace the pad. With a wax/sealant pad, you can do the entire vehicle with one pad and you aren’t doing any correction whatsoever so pads will last much longer to where you should get upwards of 60-80 vehicles prior to needing to replace a wax/sealant pad.

What is the difference between Foam, Wool and Microfiber pads?

Foam pads can be used on just about any buffer/polisher and come in varying levels of aggressiveness for compounding, polishing or for applying protection depending. Wool pads can also be used on most buffers/polishers and are typically a little more aggressive. They come in various levels of compounding or polishing options but you won’t use a wool pad for applying protections. Microfiber pads can be the most aggressive form of pad when paired with the proper polisher. Microfiber comes in various levels of compounding and polishing but aren’t used for applying protection (similar to a wool pad). Microfiber pads are designed for use on random orbital polishers (short throw or long throw) and are not recommended to be used on gear driven or rotary polishers.

FREE SHIPPING ON ORDERS OVER $115

$11.95 Flat Rate Shipping Under $115

724-325-0008

support@detailking.com

Your Cart Is Empty Cart

Cart

What can we help you find?

Your Cart Is Empty What can we help you find?

RESTOCK ON CHEMICALS

START A BUSINESS

SHOP DIY PRODUCTS

Shop Bestsellers Continue Shopping

Buff & Shine EdgeGuard Blueberry Heavy Polish Foam Pad

Name: Buff & Shine EdgeGuard Blueberry Heavy Polish Foam Pad
Brand: Buff and Shine
SKU: TnS-BNS-EDGEGUARD-BLUE-6-2
Price: 16.95 USD
Availability: InStock

Part Number: TnS-BNS-EDGEGUARD-BLUE-6-2

$30.95

Size^*

Pack Size^*

2 Pack

Single

Description

The Buff & Shine EdgeGuard Blueberry Heavy Polish Foam Pad features closed cell foam construction allowing for flawless application of light-medium cut polish or one-step polish/protection products, giving your vehicle a stunning finish. The Blueberry EdgeGuard pad can be used for everything from light to medium cutting down to polishing!

The Buff & Shine EdgeGuard line utilizes the same innovative foam technology of the URO-Tec/Reflection Artist Pads with the Patent Pending EdgeGuard Technology, giving you outstanding performance and piece of mind tackling any paint correction job!
Application & Benefits of Pad
- Application: severe paint correction including removing heavy swirl marks, scratches, oxidation,
  and water spots
- Variety of Densities: From aggressive cutting foam to soft finishing foam, there’s a pad for every stage of the polishing process
- Efficient Heat Management: The foam’s structure dissipates heat effectively, preventing overheating that can cause damage to sensitive paint surfaces
- Balanced Performance: Foam pads offer the perfect middle ground, providing enough cutting power for light defects while being gentle enough for finishing
Products to Use with Pad
Polishers to Use with Pad
- Dual Action Random Orbital Polishers
- Long Throw Polishers
- Forced Rotation Polishers
- Rotary Polishers

Frequently Asked Questions

How should I clean and care for my pads?

Pads should be cleaned during use after polishing each section with either a pad cleaning brush or an air compressor to blow our compound/polish prior to applying more product to the pad. At the end of the job, pads should be cleaned with a pad cleaning solution such as our Clean All, and can be cleaned with a machine like our Lake Country Pad Washer 4000 System or manually with a stiff nylon brush. Scrub with brush of pad washer and cleaning chemical, rinse and wring out all compound/polish/protectant residue, and then let air dry for longest pad life.
How many vehicles should I get out of a pad and how do I know when it is time to replace the pad?

The amount of vehicles that you will get out of a pad will be determined by how aggressive you are getting with the pad. Compounding pads will wear down the quickest since you are doing the most aggressive work with these pads. Running on higher speeds will also add to aggressiveness which will shorten pad life as well. You want to use multiple pads on a vehicle for best correction results but if you were to use 1 single Compounding pad to do an entire vehicle, you would probably get 10-15 vehicles on average before needing to replace the pad. If you were to use 1 single Polishing pad (again multiple pads per vehicle is best) to do an entire vehicle, you would probably get 20-25 vehicles on average before needing to replace the pad. With a wax/sealant pad, you can do the entire vehicle with one pad and you aren’t doing any correction whatsoever so pads will last much longer to where you should get upwards of 60-80 vehicles prior to needing to replace a wax/sealant pad.
What is the difference between Foam, Wool and Microfiber pads?

Foam pads can be used on just about any buffer/polisher and come in varying levels of aggressiveness for compounding, polishing or for applying protection depending. Wool pads can also be used on most buffers/polishers and are typically a little more aggressive. They come in various levels of compounding or polishing options but you won’t use a wool pad for applying protections. Microfiber pads can be the most aggressive form of pad when paired with the proper polisher. Microfiber comes in various levels of compounding and polishing but aren’t used for applying protection (similar to a wool pad). Microfiber pads are designed for use on random orbital polishers (short throw or long throw) and are not recommended to be used on gear driven or rotary polishers.

See Related Products

MYTEE LITE III 8070 Heated Carpet Extractor

$1,475.00

Pink Power Automotive Interior Cleaner

Starting at $13.95

Pearl Gloss Automotive Dilutable Interior Dressing

Pearl Gloss Interior Dressing

Starting at $15.95

Black Cherry Car Wash Soap With Wax

Starting at $14.95

Super Blue Tire & Rubber Shine

Starting at $17.95

Blue Diamond Premium Polish & Sealant

Starting at $24.95

The Rag Company Gauntlet Drying Towel - 30" x 36"

$38.00

Gloss & Glide Silica Detail Spray

Starting at $15.95

The Rag Company Creature Towel - 16" x 16"

Starting at $15.00

Select Options

Chameleon Premium Wheel Cleaner

Starting at $18.95

Shop Best Sellers

Devin A Verified Buyer I definitely recommend this machine polisher. Definitely the Cadillac for machines. I did a Porsche Boxster S in a speedy time with amazing results.

Brain C Verified Buyer Great product, I hate I didn't know about it sooner.

Jason G Verified Buyer Great extractor and great company to buy from!

Jeff S Verified Buyer Highly recommend this product for someone who is knowledgeable about auto detailing.

Henry M Verified Buyer Blue diamond is so easy to use. Leave a bright shine which is smooth to the touch. Recommend to every detailer.

Linda B Verified Buyer Finished with Pearl Gloss. Love it ...the shine last . It’s not to thick or watery nice blend and it has a decent smell. Will definitely order more.

Nick V Verified Buyer The STS3000 is the best sealant that we have ever used. It goes on easily and also comes off nicely. It is long lasting protection that also really makes our customer's paint shine and bead up

Darren M Verified Buyer I Love Citrus Clean. This is my go to for all rims. Great product I love it!

Sign Up For Our Newsletter

Get To Know Us

Let Us Help You Make Money

Using Our Site

Detail King Offices

Detail King LP
947A Old Frankstown Road
Pittsburgh, PA 15239

Detail King Auto Detailing
Training Institute, LLC
947G Old Frankstown Road
Pittsburgh, PA 15239

(724) 325-0008
support@detailking.com
Hours: 9AM-5PM M-F

Buff & Shine EdgeGuard Blueberry Heavy Polish Foam Pad

See Related Products

Related Videos

Sign Up For Our Newsletter