Water Containment Mat w/ Foam Berm
-
Our Foam Berm Car Wash Mat is made from a flexible heavy-duty poly material that is 40 mil thick, more flexible than our model with the berm brackets. The 4” foam berm contains all of your wash water while you clean the vehicle, and you drive right over it to get on and off the mat. As the EPA tightens the rules on car wash water runoff, Detail King has made it easy and affordable for mobile operators to capture their wash water and stay compliant on any site.
Highlight specs:
- 40 mil heavy-duty flexible poly material
- 4” foam berm you drive over to get on and off
- ~75% of wash water captured in the mat (the rest evaporates during drying)
- 115 lbs shipped weight
- Made to order (not returnable)
Empty the mat before you fold it up for the next job. For the recovery side, look at the Big Dog Water Reclamation System and Mr Green’s Wash Water Tank System.
The foam berm mat costs considerably more than the bracket-style mat, but it saves set-up and break-down time on every job.
Who this is for
- Mobile detailers and on-site washers who work in parking lots, driveways, and fleet yards where letting runoff hit a storm drain isn’t allowed
- Operators near waterways who need to prove they capture wash water to stay EPA and stormwater compliant
- Detailers stepping up from a bracket-style mat who want faster set-up and break-down and a berm they can drive over
Specifications
Material Flexible heavy-duty polyethylene, 40 mil Berm 4” foam berm (drive-over) Water capture Approximately 75% of wash water Weight 115 lbs Availability Made to order (not returnable) -
This item does not qualify for our free shipping promotion, and the shipping cost charged online is a flat rate. If you need extra services such as residential delivery or liftgate service, we will contact you with the shipping balance.
-
A water containment mat gives you a portable wash bay that captures the dirty runoff from washing a vehicle, so you can wash on-site in lots, driveways, and fleet yards without letting it reach a storm drain. That keeps the wash compliant with EPA and local stormwater rules; check your local requirements for disposing of the captured water.
-
You need one whenever runoff can't legally go down a storm drain, which covers most commercial and mobile washing. Rinse water carries soap, oil, and road grime that stormwater rules treat as pollution. A containment mat captures it so you can wash where open drainage isn't permitted.
-
The 4" foam berm rings the mat and turns it into a shallow basin, so water pools inward instead of running off the edge. Roughly 75% of the wash water collects in the mat while the rest evaporates during drying. You then pump or vacuum that water into a holding tank for proper disposal.
-
Not usually, since waterless and rinseless washes produce little to no runoff to contain. A containment mat matters most for traditional pressure-washing and rinse steps that generate real runoff volume. Pair it with 100% biodegradable products to keep your whole on-site wash as compliant as possible.
See Related Products
Training