Mytee S-300H Tempo Heated Spotter ***1-Week Lead Time***
-
The Mytee S-300H Tempo Heated Spotter is a one-gallon heated spotter extractor built for express touch-up work, vomit spots on a back seat, coffee rings on a floor mat, a drink spill on a console, the kind of single-spot cleanup a daily-driver detailer hits between full interior jobs. Don’t let its small size fool you. This unit runs Mytee’s “Real Heat” system, so it dissolves the same residue a full-size heated extractor handles, just on a spot-by-spot scale rather than whole-vehicle volume.
Highlight specs:
- 600 Watt heater(Mytee “Real Heat” system)
- 55 PSI solenoid pump
- 97 CFM 2-stage vacuum motor (85” water lift)
- 1-gallon tank capacity
- 26 lbs total (compact, single-hand carry)
Detail King does not accept returns on extractors that have been previously used just to try out. If you think this model is going to be too small for your use please consider purchasing one of the other models mentioned above.
Who this is for
- Daily-driver detailers doing single-spot cleanup (drink spills, vomit, pet accidents) on the road without needing to take their full size extractor
- Express detail bays and quick-lube add-ons offering spot cleaning as a 15-minute upcharge service
- Car enthusiasts and serious DIYers who want shop-grade heated extraction for cleaning spills in their own vehicles without paying for full-size capacity they don’t need
- Mobile detailers carrying the S-300H as a backup spotter alongside a primary full size extractor like the 8070 or HP90
Looking for the non-heated version?
The Mytee S-300 Tempo Spotter is the same chassis without the heater. Skip the heat only if you mostly spot-clean fresh spills that haven’t set, hot water isn’t the deciding factor on a coffee splash you catch in 5 minutes. For set-in stains, biological residue, and grease, the heated S-300H is the right call.
Note: Did you misplace your Mytee S-300H Heated Tempo Manual? Download it from the link.
Warning: This product can expose you to chemicals including Lead and Chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov
This item is not eligible for any discount.
-
- Extraction power in a spotter footprint. One of the most powerful vacuum motors in its class pulls 85" of water lift, and the two-stage vacuum shortens dry times after every pass.
- Simple to run. One switch operates the machine, and both the solution and recovery tanks use easy-open caps.
- Built to take a beating. Mytee's roto-molded housing shrugs off shop abuse, and the Air Lite Upholstery Tool comes included.
- Made for the road. With a 1-gallon tank capacity and a 26-pound body, it carries onto the job, between vehicles, and back into storage without a fight.
- Backed like a Mytee. Limited lifetime warranty on the body, two year on the pump, vacuum motor, and heating system, plus a national service-center network.
-
Warranty: Limited lifetime body / 2 year pump, vacuum motor, heating system
Body: Roto-molded polyethylene
Tank: 1 gallon
Vacuum: Single 2-stage
CFM: 97
H₂O Lift: 85"
Heater: 600 Watt
Pump: Solenoid
PSI: 55
GPM: 0.37
Wheels: 2"
Power Cord: Single 25' 16/3
Tools (included): Mytee Air Lite Upholstery Tool
Hose Package: 8' vacuum and internal solution hose combo
Product Weight: 20 lbs
Shipping Weight: 23 lbs
Product Dimensions: 20" × 10" × 16½"
Shipping Dimensions: 22" × 10" × 24"
-
This product qualifies for Free Shipping! Expedited shipping costs will also be calculated during checkout.
-
Distilled water is optional. It does keep mineral build-up out of the lines longer, but the Tempo runs fine on regular tap water, which is what most detailers actually use.
-
Carpet extractors shoot out hot water and suck it back up, so they are meant for deep cleaning carpet and upholstery. Vapor steamers boil water and put out steam, so they are meant for surface cleaning on a variety of interior surfaces. The S-300H is an extractor.
-
No, run plain water and apply soap separately with a spray bottle. Chemical inside the machine means you never rinse the soap out, so it dries stiff, gets sticky, and attracts dirt quicker. Spraying soap on first lets you rinse it clean. Running chemical also forces far more frequent descaling with Extractor Maintainer.
See Related Products
Training