SONAX Cut & Finish

• Description

  SONAX Cut & Finish is a single-stage, highly abrasive polish for quickly removing defects such as nibs, spray paint mist and sanding marks after refinishing. High abrasion with high degree of gloss, can be applied for a long time with excellent wipe-off behavior. Ideal for polishing sanded areas. Removes sanding marks of P1500 sand paper. Silicone free and low dusting. Cut: 5 Degree of gloss: 5

• For Best Results
  • If necessary, sand the paintwork beforehand with a P1500 grit (or finer).
  • Use a variable-speed rotary polisher with a medium to hard foam pad.
  • Machines can be tilted slightly at the beginning. Then, keep the pad flat and carry out several short polishing cycles, especially on fresh paintwork.
  • Wipe off polish residue with a microfiber cloth.
  • Optionally and depending on the color shade, polish to a perfect high gloss with SONAX PROFILINE Perfect Finish. Can be used with an orbital polishing machine if the scratch condition permits this or if sanding marks are P2000 or finer.
  • Regularly clean polishing pads. Never use different polishes on one pad.
  • Do not use on hot surfaces.

  Please Note

  • Protect against frost.
• Free/Flat Rate Shipping

  We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $115 (for qualifying items), and for orders under $115, a flat rate of $11.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.