Water Tank - 150 Gallon ***2-3 WEEK LEAD TIME***

• Description

  The Detail King 150 Gallon Water Tank is a UV-stabilized poly water tank built for mobile detailers chasing dealership and parking-garage accounts out of a pick-up truck, van, or trailer rig. It carries roughly 50% more water than the popular 100-gallon size: enough to add a few extra vehicles per route without committing to the footprint and payload of a 200-gallon tank. Molded tie-down slots on both sides keep the tank secure in transit.

  Highlight specs:

  • 150 gallons when full
  • UV-stabilized linear polyethylene
  • 3/4” NPT molded outlets (customizable)
  • FDA & NSF approved (resin compliance FDA 21 CFR 177.1520)
  • Molded tie-down slots on both sides
  • 46” L × 30” W × 29” H footprint
  • 2-3 week lead time (built to order)

  Who this is for

  • Mobile detailers chasing dealership and parking-garage accounts that need 10-15 vehicles cleaned per visit
  • Detail shop owners scaling a mobile route past the 100-gallon ceiling without jumping to trailer-only rigs
  • Two-operator rigs where one tank has to feed two wash stations through the day

  Sizing guidance

  • 60 gallon is right for part-time detailers doing 3-4 vehicles a day
  • 100 gallon is the working-day sweet spot for solo mobile pros doing 8-10 vehicles
  • 150 gallon (this product) is the upgrade for commercial-account routes and two-operator setups
  • 200 gallon is worth it if you routinely fill a full dealership lot or run steam plus extraction off the tank
  • 330 gallon is for fleet-contract work and dedicated detail trailers

  Water usage planning

  A typical full exterior wash uses 10 to 15 gallons per vehicle. Factors that push you to the upper end: wheel cleaning, engine bay rinsing, two-bucket wash method, or hard-water runoff requiring extended rinse.

  • Sedans / small SUVs: ~10-12 gallons per vehicle, so 12-15 vehicles per 150-gallon tank
  • Full-size trucks / SUVs: ~12-15 gallons per vehicle, so 10-12 vehicles per 150-gallon tank
  • Adding interior extraction: add 2-4 gallons of additional rinse water per vehicle

  If you’re also running a heated carpet extractor off the same tank, subtract the water used for interior details from your wash count.

• Specifications

  Capacity (when full): 150 gallons

  Material: Linear polyethylene

  UV Stabilization: Yes (for outdoor storage)

  Outlets: 3/4" NPT molded in (customizable)

  Tie-Down Slots: Molded into both sides

  Resin Compliance: FDA 21 CFR 177.1520 (C) 3.1 and 3.2

  Certification: FDA & NSF Approved

  Lead Time: 2-3 weeks (built to order)

• Dimensions
  • 46" L × 30" W × 29" H

  Optional Add On:

  • Hose & Strap Kit for 60-200 Gallon Tanks
• Shipping Information

  Shipping cost charged online is a flat rate of $350. We will contact you with the actual shipping charge if more or less.