Black Carpet Dye
-
Detail King’s Black Carpet Dye is a spray-on dye concentrate that rejuvenates faded and weathered black automotive carpets and floor mats, restoring the original deep black color without changing the carpet’s underlying hue. After cleaning and extracting the carpet, you spray the diluted dye and brush it into the fibers so the carpet regains a rich, brand-new look.
What’s in the bottle:
- 8 oz dye concentrate per bottle
- 1:3 dilution (8 oz dye to 24 oz water) for standard coverage
- Covers roughly 8 to 16 sq ft depending on degree of fading
- Applied via spray bottle plus Mat and Carpet Brush agitation
- Compatible with carpet, floor mats, and trunk liners on black factory carpet
- Works best with 150°F hot water for the most permanent results
What carpet dye restoration means: Carpet dye restores color to faded synthetic fibers when cleaning alone cannot remove a gray or brown appearance. Use it after thoroughly shampooing and drying the carpet, especially for used-car preparation or restoring worn black interiors. For routine stains and spills, use Carpet Cleaner and Upholstery Shampoo.
For This Product’s Safety Data Sheet (SDS), Click Here.
Who this is for
- Used-car prep detailers refurbishing trade-ins and auction vehicles where the factory carpet has faded
- Mobile detailers offering interior reconditioning as an upsell on older daily drivers
- Fleet and rental refurb shops standardizing the look of high-mileage interiors before resale
- Auto upholstery shops completing a full interior refresh after seat and headliner work
How the dye behaves in the fibers
This dye deepens black carpet back to its factory color rather than laying a new color over it, so a faded floor comes back rich without reading as painted or patchy. The concentrate is tunable: mix it with less water than the standard ratio when you want a darker, more saturated result on badly sun-bleached fiber. Because it goes on through a spray bottle, you can also target just the sun-hit section under a window or a worn heel patch instead of redoing the whole floor. Fresh black carpet is one of the fastest ways to change how a whole interior looks to the next person who sits in it.
Specifications
Color Black Size 8 oz bottle Dilution Ratio 8 oz dye to 24 oz water (1:3) Coverage Roughly 8 to 16 sq ft per diluted batch Application Spray bottle plus Mat and Carpet Brush agitation Safe For Automotive carpet, floor mats, trunk liners Heat Optimization Mix w/150°F water for most permanent results Reapplication Multiple coats allowed once carpet is dry -
- Revive your interior automotive carpets and mats. Automotive carpets see tons of foot traffic and take quite a beating. Naturally, they fade, weather, and accumulate stains. Our Carpet Dye makes your carpet look years younger.
- Restore color without changing it. This carpet dye WILL NOT change the color of your carpet, only restore its original color.
- Dilute dye with water to create an abundance of product. One 8 ounce bottle of Carpet Dye can be diluted with 24 ounces of water. That’s a lot of product to work with! Dilute with smaller amounts of water to create a darker dye.
- Great for spot dyeing. Sometimes just a specific part of your carpet needs to be restored. The Carpet Dye is applied via spray, meaning you can focus on just one or two areas.
- Every professional auto detailer should own a supply of carpet dyes. Fresh, richly colored carpets can change the whole complexion of a vehicle’s interior. Customers will be thrilled to see new-looking carpets.
-
- Choose a dye that is a shade darker than your carpet's color. Pour an 8-ounce bottle of dye in a 32-ounce plastic bottle sprayer, filling the rest of the bottle with water. Shake well.
- Before dyeing carpet, clean and shampoo. Use our Hot Shot Stain & Spot Lifter aerosol spray to pre-treat severe stains. Scrub the spray into the carpet with a Mat and Carpet Brush.
- Spray and brush our Extractor Soap into the carpet using the same method as the Hot Shot Plus. If desired, use the Extractor Soap with an extractor for deep cleaning. Allow the carpet to dry. For a full pre-clean workflow, the P&S 3-Step Carpet Cleaning System covers pre-treat, shampoo, and rinse in one kit.
- Make sure to wear gloves. Spray the surface with dye mix and work into the carpet with a Mat and Carpet Brush. Repeat as necessary until the color is restored.
Heat tip: For the most permanent results, heat water to 150 degrees and then mix with the dye concentrate. Apply immediately while the dye mixture is as hot as possible for best adhesion and the most permanent results. You can reheat leftover dye to the recommended 150 degrees for future applications.
-
We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $115 (for qualifying items), and for orders under $115, a flat rate of $11.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.
-
Yes. Black Carpet Dye re-pigments bleached fiber tips so faded black carpet reads deep black again in showroom light. It restores color that UV and foot traffic stripped out. It works on carpet that still has color to it, not on carpet that needs a color change.
-
No. This dye rejuvenates faded carpet that still has some color, deepening it to a richer black. It will not hide stains. Pre-clean and shampoo first, then dye to bring the color back where fading (not staining) is the problem.
-
No. This product restores black factory carpet, it does not change carpet color. Applying black dye over gray, tan, or beige will alter the carpet rather than restore it. Match the dye to your factory color: black for black, gray for gray, tan for tan.
-
One 8 oz bottle diluted 1:3 with 24 oz of water covers roughly 8 to 16 sq ft of carpet, depending on how faded it is. Heavier fading will require more product, so plan coverage toward the lower end for badly sun-bleached carpet.
-
Yes. You can apply multiple coats to build a darker result. Let the carpet dry fully between applications, otherwise a wet base coat lifts back up instead of setting into the fibers. Hot 150°F water on each pass gives the most permanent bond.
See Related Products
Training