IK e Foam Pro 2 - BATTERY POWERED

Part Number: TnS-EFOAM-PRO2-COMPLETE-KIT

$140.34

Add-ons

IK Multi Pro 2 Complete Chamber (Head Only) (+$25.95)

Description
The IK e Foam Pro 2 V.2 (Battery-Powered Foam Sprayer) is a handheld, cordless foam applicator from Goizper that builds its own pressure through a built-in compressor, so you can lay down dense, long-lasting foam on wheels, engine bays, door jambs, and full-vehicle panels without dragging a compressor hose or pump-priming a manual sprayer between sections.

Highlight specs:
- Built-in compressor automatically builds pressure up to 3 bar (43.5 psi)
- 1.5 liter usable tank capacity (2.0 L total), translucent with wide-mouth fill
- 3 color-coded foam mixers: orange (wet foam), gray (standard foam), green (dry foam)
- 8 to 10 full tanks of foam per battery charge
- USB-C charging with water-ingress-protected port, LED status indicator
- SoftStart activation, 2-second start/shutdown, over-temp + over-voltage + short-circuit protections
- 1.15 kg (approx. 2.5lbs) net weight (1.3 kg/2.86lbs gross), water-resistant (not waterproof)
Unlike a foam cannon, it needs no pressure washer behind it, and unlike a basic pump sprayer, it actually foams instead of just spraying liquid.

Who this is for
- Mobile detailers who don’t always have a pressure washer or compressor on site and need dense foam for wheels, engine bays, and pre-wash on the customer’s driveway
- Fixed-shop detailers who want a dedicated dry-foam applicator for door jambs, dashboards, headliners, and engine-bay degreasing without re-tasking the main foam cannon
- Wheel and engine-bay specialists running a wheel-only or detail-spot workflow where targeted, controllable foam delivery beats blasting an entire vehicle with a pressure-washer foam cannon
Battery sprayer vs foam cannon: which to pick
- Battery foam sprayer (this unit): self-contained, no pressure washer required, ideal for spot-foaming wheels, engine bays, jambs, motorcycles, RVs, and mobile work. Lower volume per minute, but you control exactly where the foam lands.
- Pressure-washer foam cannon: requires a 1500+ PSI washer to drive it, blankets an entire vehicle in seconds with very dense foam, best for full-body pre-wash in a fixed wash bay. Pair the MTM PF22.2 Foam Cannon with our DK2000 Pressure Washer with Tank or the Wall Mount Pressure Washer for full washes either mobile or in a shop.
- Most shops end up running both, because the use cases barely overlap: foam cannon for the full vehicle, battery sprayer for the targeted work where dragging a pressure-washer hose is overkill.
Chemical compatibility and dilution

The three color-coded foam mixers let you dial in foam consistency by task:
- Orange (wet foam): highest water content, best for general body wash and dwell-time pre-soak where you want the chemical to flow off panels carrying dirt
- Gray (standard foam): balanced output for most everyday detailing chemistry (snow foams, all-purpose cleaners, wheel cleaners)
- Green (dry foam): lowest water content, sticks the longest, best for vertical surfaces, wheels, engine bays, and interior fabric/headliner cleaning where you want the foam to cling without running
Dilute per the chemical manufacturer’s spec. For a foam-on-paint sealant pre-soak that pairs well with this sprayer, the Koch-Chemie Hydro Foam Sealant lays a protective polymer film while it foams off contaminants.
Features
- Dual pressurization. The built-in compressor holds the tank at 3 bar (43.5 psi) for continuous spraying, and a manual option keeps you working if the battery runs down.
- Three color-coded foam mixers. Orange for wet foam, gray for standard, green for dry: match the foam consistency to the job.
- Easy-fill translucent tank. 1.5 liters of usable capacity, a wide mouth for spill-free filling, and a clear body that shows product level at a glance.
- Built-in safety. Safety valve set at 3 bar with a depressurization option, a safety lock, and a protective sleeve on the valve chamber.
- LED status indicator and USB-C charging.
The V.2 upgrade redesigns the electronics with over-temperature and over-voltage protection, SoftStart activation for smoother starts and longer component life, and start-up/shutdown cut from 4 seconds to 2. A new SAT diagnostic tool reads internal data (temperature, usage, charge cycles, errors) for quick, precise servicing, and the redesigned USB-C port has better protection against water ingress.
(The e Foam Pro 2 V.2 is water-resistant, not waterproof, so proper care and usage are essential for best performance.)
Specifications
Total Capacity: 2.0 liters (approx. 67oz)
Usable Capacity: 1.5 liters (approx. 50oz)
Operating Pressure: Up to 3 bar (43.5 psi)
Net Weight: 1.15 kg (approx 2.5lbs)
Gross Weight: 1.3 kg (approx 2.86lbs)
Battery Life: 8 to 10 full tanks per recharge
Charging: USB-C, water-ingress-protected port
Pressurization: Electric (built-in compressor) + manual backup
Foam Mixers: 3 color-coded (orange wet, gray standard, green dry)
Safety Valve: 3 bar, with depressurization option
Protections: Over-temperature, over-voltage, over-current, short-circuit, battery under-voltage
Start/Shutdown Time: 2 seconds (SoftStart)
Diagnostics: SAT tool reads internal usage and error data
Water Resistance: Water-resistant, not waterproof
SAT diagnostic data recorded
The on-board SAT tool logs the following internal data for service and shop-fleet monitoring:
- Power Cycles: Number of times the device has entered Standby mode
- Reboots: Number of times the device has been started
- Motor Time: Total engine running time
- Charge Errors: Errors detected when charging the device
- Charge Cycles: Number of times a full (maximum) charge has been completed
- Charge Insert: Number of times the charging cable has been inserted
- Pressure Cycles: Number of times maximum pressure has been detected
- Max Current (mA): Maximum motor current detected, in milliamperes
- Minimum Battery Voltage (mV): Minimum battery voltage detected, in millivolts
- Maximum Battery Voltage (mV): Maximum battery voltage detected, in millivolts
- Maximum Device Temperature (C): Maximum device temperature, in Celsius
- Over Temperature: Number of times over-temperature protection has been activated
- Over Current: Number of times over-current protection has been activated
- Short Circuit: Number of times short-circuit protection has been activated
- Battery Under Voltage: Number of times low-battery protection has been activated
Free/Flat Rate Shipping

We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $115 (for qualifying items), and for orders under $115, a flat rate of $11.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.

Frequently Asked Questions

Can I foam wash a car without a pressure washer?

Yes, that is the point of this sprayer. A built-in compressor pressurizes the tank to 3 bar (43.5 psi) and the foam mixer aerates the chemical at the nozzle, so you get clinging foam with no pressure washer or hose. It runs cordless anywhere: driveways, mobile jobs, wheels, and engine bays.
Do battery foam sprayers work as well as foam cannons?

For targeted work, yes; for whole-vehicle speed, a cannon wins. A cannon uses a pressure washer's 1500 to 2000+ PSI to blanket a full car in seconds. This battery unit makes its own foam at lower volume but with full portability and precise aim. Most shops run both since the use cases barely overlap.
How many vehicles can I foam on a single charge?

The spec is 8 to 10 full tanks per recharge, roughly 12 to 15 liters of foam at 1.5 L usable per fill. That covers a typical mobile detailing day (wheels and engine bays on several vehicles) or a heavy half-day of foaming. Keep a spare USB-C cable to top off from a power bank.
What chemicals can I use in it?

Use water-based detailing chemistry: snow foams, all-purpose cleaners, wheel cleaners, interior cleaners, sanitizers, and foam sealants like Koch-Chemie Hydro Foam. Avoid solvent-heavy or strong-acid products not rated for plastic-bodied sprayers, and check the manufacturer's recommendations first. Rinse the tank with clean water daily so the mixers and valves do not clog.
Are replacement parts and batteries available?

Yes. The unit is built by Goizper, a Spanish manufacturer of professional sprayers, and replacement foam mixers, seals, and battery components are available through the IK service network. For a specific part or warranty support, contact Detail King and we will route you to the right service path.