DK2000 Pressure Washer w/Tank

Part Number: EQP-DK2000-PR-WASH-TANK-60

$3,149.00

Water Tank Size^*

60 Gallon

100 Gallon

200 Gallon

Add-ons

MTM Hydro PF22.2 Foam Cannon PLUS 1.1mm Orifice (+$94.49)

Undercarriage Pressure Washer Attachment (+$64.95)

Black Cherry Car Wash Soap With Wax - 5 Gallon (+$188.95)

Microfiber Chenille Wash Mitt (+$8.95)

The Rag Company Gauntlet Drying Towel - 30" x 36" (+$38.00)

Description
The DK2000 Pressure Washer with Tank is a gasoline-powered mobile detailing kit that pairs the DK2000 pressure washer with a water tank, designed to be bolted to a pick-up truck bed, van floor, or trailer so a mobile detailer can pull up to any job and work off a self-contained water supply.

What makes the DK2000 a true mobile kit: the direct-drive diaphragm pump. It draws water from a static source like the on-board water tank, so the unit runs fully self-contained: no spigot, no cord, no external power. Hardware-store pressure washers need pressurized inlet water and will not work off a tank. Where a faucet is available, you can also hook the DK2000 to a hose and conserve the water in your tank. Use cases: driveway details, fleet washes, parking-lot events, and commercial route work. For a fixed-bay installation on shop electrical and city water, the Commercial Wall Mount Electric Pressure Washer is the right pick.

Who this is for
- Mobile detailers running route work or on-site service who need a self-contained water supply
- Fleet/route operators washing trucks, RVs, big rigs, and equipment where there’s no spigot on site
- Multi-location shops that send a second crew to parking-lot or property-management accounts
- Off-site event detailers (auctions, dealer lots, corporate fleet events) where shore water isn’t available
What’s in this package
- DK2000 Pressure Washer: the gas-powered unit, built to hold up to day-to-day commercial use and last much longer between servicing than a consumer-grade unit
- Water Tank: Choose from 60, 100, and 200 gallon sizes.
- 5’ Connecting Hose and Nylon Cargo Straps: the hose feeds the pump from the tank; the straps secure the tank to your truck bed or van floor
Optional Add-On Items:
- Undercarriage Pressure Washer Attachment
- MTM Hydro PF22.2 Professional Foam Cannon Plus 1.1MM Orifice
- IK e-Foam Pro 2 Battery Foam Sprayer (for chemical pre-soak without a pressure-washer foam cannon)
- Black Cherry Wash & Wax (Gallon/5 Gal)
- Microfiber Chenille Wash Mitt
- The Rag Company Gauntlet Drying Towel (30” × 36”)
Mobile DK2000 vs Wall-Mount Electric: which to pick
- DK2000 Mobile Rig (gas, with tank): for mobile detailers, fleet/route work, off-site events, and any operation where you can’t count on electrical power. Gas means you run anywhere, but it also means exhaust (don’t run in an enclosed bay) and routine engine maintenance.
- Wall-Mount Electric (electric, plumbed in): for fixed-bay shops with city water and 115V or 220V service. Zero exhaust, lower noise, and no carb maintenance, but tied to one location.
If you do both (a fixed shop plus route work), the two units complement each other: the wall-mount lives in the bay, the DK2000 lives in the truck.

Tank sizing: how much water per job

A standard exterior wash uses roughly 10 to 15 gallons of water depending on vehicle size, pressure tip selection, and how long you run the rinse cycle. Practical capacity math for a 100 gallon tank:
- Small to mid-size vehicles (10 gal/wash): roughly 10 washes per fill
- Full-size trucks and SUVs (15gal/wash): roughly 6 washes per fill
- RVs, big rigs, and heavy-duty trucks: will depend on size and condition
For high-volume route work, step up to the200 gallon tank. For tight low-clearance pickup beds, the 60-gallon low-profile tank keeps the tank height down at the cost of fewer washes per fill.
DK 2000 Features

Beyond the raw specs, the DK2000 is built to live in a truck bed, cargo van, trailer, or box truck. Easy-access mounting holes bolt it to a bed, van floor, or trailer deck, and rubber feet absorb vibration so it stays put on the road and doesn't rattle. The vertical locking hose reel plus a bracket for the wand keep the hose from eating cargo space. The adjustable soap injector foams big rigs, RVs, SUVs, and vans in one pass, and the low-oil shut down protects the engine if you forget to check the oil at the start of a shift.
DK 2000 Specifications

PSI: 2,000
GPM: 3.0
Engine: Briggs & Stratton OHV w/ low-oil shut down
Engine Powered: Gasoline
HP: 6.5
Pump: Diaphragm (direct drive)
Hose: 50'
Spray Wand: 18"
Pressure Tips: 2
Soap Injector: Yes (adjustable)
Frame: Black powder-coated heavy-duty steel
Size: Compact
Skid Mounted: Yes
Weight: 85 lbs
Dimensions: 27" L × 18" W × 30" H
Warranty: 1 yr factory, 5 yr limited on general pump, 2 yr on motor
Flat Rate Shipping

Shipping cost charged online is a flat rate of $375. We will contact you with the actual shipping charge if more or less.

Frequently Asked Questions

Can a pressure washer draw water from a tank?

Only if it has a direct-drive pump, which the DK2000 does. Its diaphragm pump pulls from a static 90-gallon tank without losing prime. Standard hardware-store units need pressurized inlet water and will burn up running dry off a static tank source.
What size pressure washer do I need for mobile detailing?

For auto detailing, aim for around 2,000 PSI at 3.0 GPM, exactly the DK2000's output. That pressure strips grime and grease without stripping trim or paint, and the flow rate rinses fast. Higher-PSI construction units are overkill and riskier on automotive finishes.
Which water tank is included, and can I swap sizes?

It ships with a 90-gallon plastic tank plus a 5' connecting hose and nylon cargo straps. Other sizes (60-gallon low-profile, 100, 150, 200, 330 gallon) are available, call for pricing on substitutions. Pick the 60-gallon low-profile tank for tight pickup beds.
How does the DK2000 mount in a truck bed or van?

Easy-access mounting holes in the skid frame let you bolt it to a truck bed, van floor, or trailer deck. Recessed rubber feet absorb vibration, and the tank straps down beside it. Plan the layout so exhaust clears the cab and the fill port stays reachable.
What's the fuel consumption for a full day of detailing?

This 6.5 HP engine runs intermittently across a route (clean, idle, clean), not continuously. Most operators plan one or two top-offs over a 6-to-8 hour day and carry a spare can. Check the dipstick each shift, the low-oil shutdown protects the engine if you forget.